Posted by Admin on Apr 27, 2017
Installing a cell phone signal booster consists of a few short and easy steps. Become a cell phone signal booster installation expert by learning how to install a cell phone signal booster in your home, office or building with ease. Watch the video provided below that shows how a cellular amplifier can be installed easily in only three steps.
Subscribe to YouTube Channel.
Congratulations on purchasing your new home cell phone signal booster. In a few short steps, we will show you how to install a signal booster in your home or building. You will be able to relax knowing you're connected inside your home. No more dropped calls or running outside to answer the phone.
There are three components you will need to install to get your signal booster up and running. The outside antenna. The signal booster or amplifier. And the inside antenna.
To begin, mount the outside antenna on exterior of your building. On the roof, if possible. Mount it in a location with the best signal. Use your phone to accurately find the best signal by putting it in " test mode". Connect the antenna to a length of cable. Run the cable from the antenna to the location where you will be mounting the signal amplifier or booster inside your home or building. Is the run too long for a single length of cable? An additional length can be connected using the supplied barrel connector.
Locate where you will need the strongest signal. Some boosters will cover your entire house. Others will cover a single room. Keep this in mind when placing your inside antenna. You can mount the inside antenna to a wall or put it in the attic. Make sure you keep enough space between the inside antenna and outside antenna. Refer to your install guide for these specifications. Mount the inside antenna as described in the install guide. Run the cable to where the booster will be mounted. The booster can be installed anywhere you see fit. For example, inside a closet or behind a desk. Its location does not matter because the inside antenna is what broadcasts the signal inside the house.
Make sure the location you choose allows for adequate ventilation. With the booster in place, connect the inside and outside antenna cables. Then connect the booster to a power source. We recommend using a surge protected power strip. You're done. Now, you can sit back and relax. You are connected inside your home or building.
We hope this has been helpful in getting you setup with your cell phone signal booster for home or building. See the video for more information to help answer your questions. Contact us if you need assistance. We offer professional cell phone booster installation service by certified installers for large commercial applications. If your building requires commercial grade signal amplifier(s) for 10,000 square feet or more, please submit request for quote. Thank you!