Posted by Admin on February 16, 2017
Check out the complete process of installation for the Drive 4G-X OTR cell phone signal booster for trucks. Simple step by step instructions illustrated for easy understanding of installation process.
Subscribe to YouTube Channel.
Included with the Drive 4G-X OTR, you're going to have the following components:
You’re mainly going to get exterior antenna, amplifier unit, and interior antenna. It will also have the mounting bracket to mount outside antenna, and the power supply.
The first logical step would be to install your external antenna. It comes with a mirror bracket that you can attach to the mirror. Exterior antenna simply hooks on to that bracket. Then, run the cable inside the cab of the truck. To do this, run it down underneath the weather stripping. Then wrap the cable underneath the panel. Next, install the main unit, the signal amplifier. This can be done many ways or however you see fit. We typically use some industrial-strength Velcro, and then just attach it to the side within front passenger's legroom area. Before we install the booster, we can clean the area with alcohol prep pad to ensure that you get a good bond. Then press the booster firmly in place. And once the booster or amplifier is mounted, we simply attach it to the outside antenna and then attach the inside antenna. Then we can run antenna cable underneath and over to where we're going to install interior antenna.
It is a good idea to install inside antenna right underneath so that it will be close to the cell phone. This will give the cell phone the best possible signal available. Again, we can clean off this new area with alcohol prep pad and then stick inside antenna right there. All that is left to do is just to plug it in and turn it on.
Installation is thereby complete. With that, you will be back on the road with a strong reliable signal. View the video shown above which shows the full installation process for weBoost Drive 4G-X OTR cell phone signal booster for trucks.