Posted by Admin on July 24, 2016
Find out everything there is to know about RG58 cables so you can be well informed and make the best decisions regarding your RG-58 networking installations.
This is a unique coaxial cable hugely used on RF and low-power signal connections. Essentially, the cable usually has a general impedance of 50 to 52 Ohm with an outer diameter of about 5mm or 0.2 inches. The cable has a weight of about 37g per meter or 0.025 lb. per feet. RG-58 coaxial cables are designed to work with many of the two-way communication systems such as antennas, fire, police, amateur, CB radio to marine communication systems among others that need a 50 Ohm cable to function.
It is also highly used as a signal generic carrier particularly in labs and has also been used in frequencies that are moderately high. The signal attenuation for the RG-58 does depend on its frequency, such as 21.5 dB at 1 GHz per 100 feet, 70.5 dB at 50 MHz band per 100 meters and 3.3 dB per 100 feet. The modern car, truck, RV and Boat's cellular phone signal booster system is usually fitted with the RG-58 cables with a low signal loss per ten feet of the coaxial cable at a frequency of 800 MHz being 1 dB and 2.66 dB at a band of 1900 MHz.
RG-58 coaxial cables include the following.
The Wilson 951110 RG-58 two-foot coaxial cable is best for testing and tuning Yagi type of antennas and connecting Yagi to a specific external antenna adapter from Wilson. It has a signal attenuation of below 0.4 dB with N-Male and FME-Female connectors.
The Wilson 951134 N-Male/ N-Male RG-58 two-foot cable is a black colored unique cord best for extensions. The cable has a diameter of 3/16 of an inch in diameter and ensures there's a secure connection between surge protectors, taps, splitters and exterior or interior antennae and an amplifier. It can be used outside or inside a home as a low-loss coax cable. It incurs a low loss of signal of 0.2dB attenuation. Both ends are connected with N-Male connectors.
The Wilson 951101 five feet coaxial cable is best for outdoor and indoor usage as an antenna cable for extensions. With FME-Male to FME-Female connectors and a signal attenuation of 1 dB, it requires adapters if being used with cables equivalent to 9913.
This Wilson 951102 ten-foot RG-58 low loss coax cable has FME-Male/ FME-Female connectors fitted on it. It is thickness of 3.16 of an inch in diameter and the best for connecting an outside or inside antenna to an amplifier. It has 1 dB signal attenuation while using it with 9913 equivalent types of cables necessitates an adapter.
Wilson 951120 is a low-loss ten-foot RG-58 coaxial cable with N-Male/FME-Female connectors fitted on it. This 3/16th inch in diameter cable ensures connections exist between outside and inside antennas and the amplifier. They are highly used outdoors and indoors and have a signal attenuation of below 1 dB. Signal loss per 10 feet at 800 MHZ band is 1.0 dB and 2.66 dB signal loss per 10 feet in a frequency of 1900 MHz.
The Wilson 951147 is a RG-58 ten-foot coaxial low loss cable with SMA-Female/ SMA Male connectors fitted. The coax cable extends your reach at the most minimum loss of signal. Its diameter is 3/16 of an inch with a 3.58 dB signal loss per 10 feet at 800MHz band and 6.66 dB per 10 feet in a frequency of 1900MHz.
The Wilson 951103 15-foot RG-58 low-loss coaxial cable is best used indoors and outdoors as an extension cable best for antennas. Generally, it has 3 dB signal attenuation and fitted with FME-Male to FME-Female types of connectors. To use it with cables that are 9913 equivalent, you need adapters.
The Wilson 951125 white twenty-foot RG-58 coaxial cable is an outdoor and indoor 3/16 of an inch thick cable with FME-Male/ FME-Female fitted connectors. It helps in the connection of outside/ inside antennas and the amplifier. It has a 1.0 dB signal attenuation per ten feet on 800 MHz frequency and 2.66 dB attenuation on a band of 1900 MHz per ten feet.
The Wilson 950002 twenty-foot coax cable is a R58-G coaxial black cable with FME-Female to TMC-Male connectors great for outdoor and indoor usage. Signal attenuation is low than 0.4 dB while the cable is 3/16 of an inch in diameter and best for connecting the amplifier and outside and inside antennas, taps and splitter. R58G cable has a signal loss of 1.0 dB on 800 MHz frequency per ten feet and 2.66 dB per ten feet on 1900 MHz band.
Wilson twenty-foot 951104 RG-58 coaxial cable is fitted with N-Male to SMA-Male connectors. It is great for outdoor and indoor use and best for connecting Yagi directly onto the external Wilson antenna adapter. The coaxial cable has 4 dB signal attenuation.
The Wilson 951148 twenty-foot coaxial cable is fitted with N-Male/ N-male connectors and great for 50 Ohm systems. The white coaxial cord is a low-loss cable. It is prominently found as a part of the Wilson Marine Kit, an amplifier designed to improve data/phone reception on boats.
Wilson 951137 thirty-foot coaxial RG-58 cable comes fitted with N-Male/ FME-Female connectors. The low loss coaxial cable is black in color and forms a part of the Wilson 308411 Kit, an outdoor building antenna that seamlessly works with amplifiers and other 50 Ohm accessories and amplifiers.
Wilson 951138 low loss foam coaxial is a thirty feet long cable with FME-Male/ FME-Female connectors. The high quality cable connects outside/ inside antennas with amplifiers ensuring signal loss is very minimal. The superior quality coax cable is ideal for outdoor and indoor usage.