All weBoost & Wilson Pro kits by Wilson Electronics are designed and engineered in USA. Download PDF catalog to browse all kits and accessories we carry:
We will not only match the price, but we will beat it to compensate you generously for your effort to contact us.*
Rest assured, we monitor prices online to ensure that you get the best value.
However, if you find this item at a lower total cost incl. shipping, please CHAT LIVE, CALL, or EMAIL us. Thank you.
*Some restrictions may apply. Please contact us for details.
Canadian WilsonPro 1050 (460230F) commercial cell phone signal booster is approved for use within Canada by ISED and IC. This set of two WALL-MOUNT Wilson Pro Canada commercial grade indoor cell phone boosters are for large buildings and indoor spaces as well as other in-building applications. It eliminates dead zones by boosting reception of multiple cellular devices all around the signal amplifier/ repeater antennas installed inside offices or spaces within buildings. With stronger interior signals, it improves cellular voice clarity.
Likewise, it also promotes instant text message sending and receiving. Lastly, more powerful signals provide faster 3G and 4G LTE wireless data transfers on all 3G and 4G LTE Canadian networks incl. Bell Mobility, Telus Mobility, Rogers Wireless and Freedom Mobile. Package includes: 460030F - 5-band 50 Ohm Main Signal Booster with XDR Technology and an integrated power supply. 461030F - 5-band 50 Ohm Inline Signal Amplifier with XDR Technology and an integrated Power supply. 304412 - 4G dome Antenna. 314411 - Wide Band Directional Antenna. 859902 - Lightning Surge Protector. 952302 - 2 ft. WILSON400 Ultra Low Loss Coax Cable. 952300 x 2 - 100 ft. Black LMR-400 Cable with N-Male to N-Male Connector. 952375 - 75 ft. WILSON-400 Ultra Low Loss Coax Cable.
WilsonPro 1050 is the only passive distributed antenna system (DAS) with a unique dual amplifier design to compensate for cell signal that is lost over long lengths of cable ensuring that businesses have strong cell service throughout their entire building at all times.
Wilson 1050 cell phone signal booster system provides significantly enhanced voice and data coverage including 4G LTE deep inside large homes or other buildings by compensating for signal loss caused by long cable runs. As cellular signal moves over long lengths of coaxial cables some of it is lost, reducing booster system performance. Wilson 1050 booster system addresses this technical problem by employing two separate boosters - a main signal booster and a supplementary inline booster.
All commercial cell phone boosters work this way: 1) They take signal from outside using exterior antenna. 2) Those signals are then sent inside using a cable. 3) Signals are then amplified by the signal amplifier. 4) The boosted signal is distributed indoors by interior antenna. Therefore, stronger the cellular reception outside to begin with, larger the coverage range that can be expected inside with installation of this office / home cell phone booster kit.
No other commercially available cell signal booster system uses the 1050's unique dual-amplifier design to compensate for signal that is lost over long lengths of cable. Wilson Electronics engineers designed the system so the "Wilson 1050" main and inline boosters communicate with each other. Working together the two amplifiers determine the actual signal bleed along the cable run, and supply sufficient boost to compensate for this lost signal. In addition, the WilsonPro 1050 features XDR (Extra Dynamic Range) technology that prevents overload conditions which can force a booster to reduce power or even shut down.
This powerful dual-booster design allows clients with large homes to enjoy maximum indoor cell coverage - no more dropped calls or lost connections, faster uploads/ downloads and a reliable, up to 32x stronger signal. When the WilsonPro 1050 senses that any incoming signal is too strong and threatens to overload the system, XDR automatically reduces signal gain to compensate for this overload condition while maintaining signal coverage throughout the building. In contrast, competing signal boosters shut down when they reach a maximum incoming signal strength threshold, causing the indoor cell signal to drop out.
Wilson Pro 1050's inline booster works only with the Wilson-Pro 1050 main, and cannot work as a stand alone booster. Nor can the inline booster work with any other cell signal booster. FCC regulations prohibit any sale or distribution of the inline booster except as part of the WilsonPro 1050 system. Like all WilsonPro cell signal boosters, the WilsonPro 1050 booster system is universal: it works for all cellular devices, all services including 4G LTE, and all Canadian cell phone carriers.
|Supported Carriers||All Canadian Cell Phone Service Providers|
|Frequency||700 MHz on Band 12 and 13; 850 MHz on Band 5; 1700 - 2100 MHz on Band 4; 1900 MHz on Band 2|
|Max Gain||70 dB|
|Power Requirements||110-240V AC, 50-60 Hz, 30 W|
|Dimensions||6 x 3.5 x 1.25 inches|
|Supported Standards||CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards|
Get an industry-leading two years manufacturer's warranty on all consumer grade weBoost amplifiers. All Wilson Electronics' commercial grade WilsonPro cell phone amplifiers have three yrs. manufacturer warranty. Furthermore, we provide sixty days extended return policy on all brand-new and used or refurbished weBoost & Wilson Pro cell phone boosters and GSA items. If you have questions or require help, please email us or call our customer and tech support at toll free number 1(800)501-3153. We will be happy to guide you. In addition to lowest price, all cheaper refurb. items are factory tested and include one year manufac. warr. Unless on-sale/ clearance products explicitly state the word "refurbished", all items we stock are brand-new!