2G, 3G, 4G, WLAN Indoor Ceiling Antenna Dome (2 - 5 dBi 75 Ohm Broadband 698 MHz to 2700 MHz) with Pigtail cable terminating in Type F-Female connector.

Quick Summary.

4G Omni-Directional dome antenna is very popular and high performing inside building antenna system because it features an elegant design which is stylish enough to blend into any type of decor. It is compact and low profile. As most of our building interior dome antennas, it features wideband frequency range from 698 MHz to 960 Mhz and 1710 Mhz to 2700 MHz boosting signals on a 75 ohm system to cover 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. Its installation is easy and multi-band antenna boasts coverage for all Carriers in USA and Canada including the latest 4G LTE+ / LTE-A and AWS frequency bands. It features vertical polarization and a maximum of 5 decibels gain. It features F-Female connector at the base that can be used with standard 75 Ohm cables. It is made to distribute signals in all directions, and from practically all cellular service providers regardless of whether 2G, 3G, 4G, or LTE and even W-LAN.

The mounting hardware included enables antenna to be placed on any ceiling thereby improving the signal in all directions along its radius. This omni-directional antenna is a perfect choice if you have an existing cell signal outside the building or for boosting multiple carriers with cell towers located in opposite directions. The MSRP of this omni-directional antenna is quite high but we sell it at a very competitive price point.

Overview

This interior omni-directional antenna is a popular choice for installation indoors. It is compatible with 75 ohm amplifiers and accessories. It draws cellular signal from all sides and therefore, it does not need to be pointed toward any particular cellular tower.

Installation Guides:

Simple installation instructions are included with purchase.

Technical Specifications:

• Frequency: 698-960 MHz and 1710-2700 MHz for 3G/ 4G/ GSM/ PCS/ CDMA/ LTE/ WLAN.
• Input Impedance: 75 ohms.
• Antenna Gain:  2± 0.5dBi (698-960 MHz)/ 5± 0.5dBi (1710-2700 MHz).
• Max power: 50 watts.
• Radiation: Omni-Directional.
• Polarization: Vertical.
• Connector: F-Female.
• Beamwidth horizontal plane: 360 degrees.
• Beamwidth vertical plane: 60 degrees.
• VSWR: Less Than 2.0.
• Ideal Installation Surface: Wood or Plaster.
• Ground Plane: Built-in ground plane.
• Height below ceiling: 3.3 inches or 85 centimeters.
• Diameter: 7.3 inches or 185 millimeters.
• Cable Length: 11.9 inches or 300 millimeters.
• Color: White.
• Mounted With: Nut and Bolt.

Kit Includes.

• Multi-band 75 ohm Omnidirectional Antenna.
• Mounting hardware to mount on flat horizontal surface or a wall (ceiling mount recommended for best results).

Detailed Summary.

• Designed to be mounted inside of a building on ceilings.
• Omni-directional antenna.
• Easy and quick installation.
• Resistant to extreme heat and cold with with tough ABS material.
• UPC: 682962482461.
  
• Improves the transmission of cell phone signal indoors.
• Designed for fixed installations.
• Comes with mounting hardware that is necessary for installation.

This 5 band 4G LTE antenna is an Omni-directional antenna, specifically designed for 360° coverage for WLAN and 2G, 3G and 4G systems for Cellular, AWS, PCS, and LTE frequencies. This is a high-gain indoor antenna, designed for areas where the signal is to be broadcast over a central space or area. It is this ceiling-mount antenna that receives and transmits signals to cell phones.

Installation Steps.

• In order to run the antenna cable to the signal booster, select a location on the ceiling which is accessible from above. Ensure that your location for inside antenna has allowed for the required separation between the inside and outside antennas (Please see "Antenna Separation Table" in instruction guide).

• Next, drill a 3/8" diameter hole in the ceiling: The thickness of the ceiling should be 1/2". 

• Unscrew the fixing nut from antenna and place the cable for antenna through the hole. Screw the fixing nut back onto the base of antenna and the cable on the attic side of the ceiling, then fasten.

• Attach the connection on your booster from interior antenna to the cable leading to the connector labelled, "Inside".

• Hand-tighten the fixing nut in order to secure your antenna.

Transportation and Storage.

Place in a dry environment in a non-extreme room temperature: It should never be placed near an open flame or fireplace.

Specifications: