Marine Antenna Mount (weBoost 901119) with required Hardware and Instructions

Marine Antenna Mount (weBoost 901119) with required Hardware and Instructions.

If you are looking for reliable antenna mount that can be used to mount marine antenna, here is the best type of antenna mount. If you are spending your time on boat or any watercraft, this type of device would be applicable to you. UPC: 813986006238.

Brief Summary.

For use with Marine Cell Phone Signal Booster Antenna 311130. Attaches to boat or watercraft using 4 screws on base. Includes adjustment and cinching arms. Standard 1 inch by 14 thread.

Quick Summary.

If you spend most of your time on the sea, this Marine Antenna Mount can be a great help for you. Many people who are spending their life on sea use marine signal boosters to improve wireless communication reception. According to them, they can easily reach their loved ones with the help of signal amplifiers and related antennas despite the long distance between them. Signal boosting devices bridge them to their loved ones. weBoost 901119 Marine Antenna Mount is specially designed together with the Wilson marine antenna 301130 for help in its installation. 

Overview.

This Marine Antenna Mount features 1 inch by 14-threaded standard which includes both cinching arms and adjustment arms. You can mount or install the device on any surface of your boat, yacht, or any type of watercraft by way of the four screws located on its base. Only basic and simple assembly is required for the device to work for you. This marine antenna mount is designed for use together with the Marine Antennas specifically, the Marine Antenna 301130.

What does Marine Antenna Mount Kit Include?

The package includes Wilson 901119 Marine Mount, hardware to install it, and installation procedures. A marine antenna and its mount are two devices that work together providing you the best signal that you could ever have as you sail your watercraft.

Detailed Summary and Brief Installation Instructions.

The instructions in mounting the device can be seen on the box. You can also ask the customer service for any technical support. Bear in mind that this device will only work if you mount it properly. 

1. Arrange all parts (threaded mounting arm, angle mounting arm, cinching arm).
2. Next, be able to insert the 2-1/2" bolt with the 3 washers into the cinching arm through the angle mounting arm and into the threaded mounting arm. Adjust the parts until it can be rotated easily. 
3. Then, you have to place the nut and the washer at the end of 2-1/2" bolt. Then you tighten it.
4. By rotating counterclockwise its cinching arm, you lock the threaded mounting arm.
5. The ratchet area of angle mounting arm must be placed into the ratchet area of the base of the antenna.
6. Then, you insert its 2" bolt into the antenna mount base, and the angle adjusting arm.
7. Position the angle mounting arm in its right location, then lock it with the nut and washer.

The device is now ready for mounting in any desired place, you can review instructions provided in the kit.