weBoost EQO 4G Cell Phone Booster for Apartment/ Condo 474120

weBoost eqo 4G cell phone signal booster for home includes everything you need to get started to get the best signal in your home or office. It boosts inside building coverage over up to 1200 square feet. This is a complete home/ office cell phone signal booster kit with following parts included. This is the new and improved version of previous weBoost eqo cell phone booster for home/office. This SKU # 474120 / 474120F was previously 473120/ 473120F. The main difference is that this one has a convenient window exterior antenna which combats signal blockage caused by low emission glass that exists in practically all windows of new homes.

What makes this mobile signal amplifier unique?

The two factors that makes this cellular signal amplifier unique are:

• Unlike most other cellular repeaters, this wireless amplifier is an easy to install, "plug and play" amplifier kit that can be installed in under 5 minutes.
• It does not require access to the roof like most other cellular amplifiers. Therefore, it is ideal for renters such as businesses that rent office space in an office building or individuals and families that rent an apartment in an apartment complex building with no permanent installation privileges to mount an antenna on the roof.

New version weBoost eqo 4G kit with UPC 811815027096 includes:

• eqo 4G amplifier (474020 / U474020) unit for placement near window or anyplace with best reception in the home (Previously Wilson 473020/ U473020).
• eqo 4G inside antenna for placement on desktop or similar surface in area with weak indoor reception that needs improvememt.
• eqo 4G outside antenna - Unique feature of this new version for even better indoor reception than previous version.
• 6 feet RG58 cable (950622) to connect external flat window on-glass adhesive-mounted antenna.
• 25 feet RG-58 cable (950623) to connect amplifier unit (placed close to window) with interior coverage unit (placed where there's weak reception indoors).
• AC wall power supply (859948) to power-on the signal boosting system after installation.
• User manual & installation guide.

Benefits:

• Effectively boosts 4G LTE & 3G mobile signals for a desktop workspace or one large room in a home, office, or apartment.
• Boosts wireless coverage area up to 1,500 sq. ft. depending upon outside signal strength (see chart below).
• For multiple simultaneous users and cell devices such as smart phones, tablet computers, mobile hotspots.
• Plug-n-Play. It requires only under 5 minutes to fully install it with ease.
• New easy to follow and easy to understand integrated installation guide to ensure proper setup.
• Certified and approved for use by FCC (Federal Communications Commission) in USA & IC (Industry Canada) in Canada.
• Unlike most other reception amplifiers, an exterior access to commercial building, home, or apartment for installing external antenna on roof is not required. 
• Unlike cell service carrier provided signal amplifiers, this unit does not require nor use broadband internet for its effectiveness or operation.
• Unlike service provider provided signal boosters, this unit works on all cell phones and with all service carriers (including AT&T, Verizon, Sprint, T-Mobile, Rogers, Bell, and Telus) simultaneously.

Summary.

Combat Low Emission Glass Windows that block cell phone signal with this new model weBoost eqo 4G 474120. It combats Low Emission Glass windows by enabling placement of external antenna outside the window yet making it easy to install by not having to place antenna on the roof. Installation can be completed in under 5 minutes!

Easy Installation Steps:

Step 1: Place Booster In Strong Signal Location On or Near Window Sill.

• IMPORTANT: This is the most critical step of installation process because it will determine booster system's overall performance. Do not connect the Booster to power until STEP 4. 
• Turn off your cell phone's WiFi to ensure you're checking the cellular connection. The dBm reading will be refreshed every 30-60 seconds. 
• Want faster results? Once you have a reading, turn on airplane mode. Wait 15 seconds. Turn off airplane mode. The signal strength reading is refreshed. 
• Walk around your home/ office taking signal strength readings until you find the window that has the best reception. 
• Place your Booster in that area with the strongest cell phone signal. The LED light, and weBoost logo should be facing into the room. Note that this will need to connect unit's inside antenna (Step 5) with the 25 feet cable.
• Having an accurate measurement of signal strength in decibels (dBm) is crucial when installing your system. Decibels accurately measure the signal strength you are receiving.
• If you're not able to get a strong cell signal, try using an app like Open Signal to find the side of your house closest to a cell phone tower and install the booster on that side of the house.

Step 2: Connect the 6 feet Cable to the Booster Unit Port Labeled "Outside Antenna".

Step 3: Connect Outside Antenna.

1. Connect Outside Antenna to the 6 feet flat cable (from Step 2).
2. Open window, place Outside Antenna between window and window screen with the weBoost logo facing inside.
3. Close window (Don't worry, the flat cable will be okay).

• If your window does not open, skip steps 2 & 3.
• If this is the case, it is important to have the Booster (Step 1) in the window sill with the weBoost logo facing inside the house.
• If you don't have a screen to hold outside antenna, use the included double-sided adhesive to stick antenna against the window.
• For areas in full basements, place outside antenna as high on the window as possible. 

PLEASE NOTE: If your window does not have Low-E glass, it is best to use the booster without outside antenna. Most new windows use Low-E glass. If you're unsure, test results both with and without using the outside antenna. Just remember to disconnect outside antenna cable from the booster if you're not using outside antenna.

Step 4: Connect 25 feet Cable to Booster Unit Port Labeled "Antenna".

Step 5: Place Inside Antenna in Weak Signal Location and connect to 25 feet cable.

• IMPORTANT: The further apart Antenna is located from the Booster, the better your coverage will be. To determine the best location for your Booster, note the dBm reading in a variety of locations.
• eqo booster and antenna should face the same direction with 15 to 25 feet separation distance. Do not place them face to face nor back to back.

Step 6: Connect The Booster to Power.

1. Connect the Power Supply on the side of the Booster. 
2. Plug the Booster in. The light may change colors for the first 15 seconds. Check your coverage area. Refer to TROUBLESHOOTING section in the user manual, if needed.

Installation complete! This entire process can take up to 5 minutes. The reception will be significantly improved and you can enjoy using your wireless devices more effectively.