Wilson 859907 - 10dB Tap 0n 800 MHz w/ 1.5 dB Pass Thru (50 Ohm)

Wilson 859907 - 10dB Tap. 50 Ohm. UPC: 813986004326.

The weBoost 859907 is a −10dB Wide band (700-2500 MHz) Tap. They are designed to be used in setups where a smaller amount of signal is desired in one area and a larger amount in another. Taps can be used to split the amplified signal for multiple inside antennas with minimum signal loss. Wilson's taps are encased in a weatherproof housing, making them suitable for indoor or outdoor use. Comes with N-Female Connectors.

Taps are designed to split amplified signal for multiple inside antennas with minimal loss as well, but they are designed to have an unequal output. This unequal output allows for a smaller amount of signal to travel to one area/ antenna site, and a larger amount in another area/ antenna site.  

     Key Features.

• Unequal amounts of signal sent to two antennas for different sized areas.
• One output port loses 10 dB; one loses 0.5 dB.
• 90 percent of the signal strength is sent through the -0.5 dB output port.
• Can be wired in series (daisy-chained) to power up to 20 antennas.
• weatherproof case.         

10 DB tap for signal distribution systems to split the amplified signal to multiple inside antennas with minimal signal loss. These 2-way unequal splitter are ideal for in-building applications that require the combining or dividing of RF to accommodate multiple antenna locations. Weatherproof case for indoor or outdoor use.

Brief summary.

50 Ohm with N Female Connectors. -10 dB, 700-2500 MHz. For use in signal distribution systems to split the amplified signal for multiple inside antennas for minimum signal loss or for controlling the amount of signal to small and large areas. Features low-loss signal throughput with one -10 dB tap. Manufactured by Wilson Electronics and branded as weBoost.