Wilson Pro 1050 Dual Signal Booster System | WilsonPro 460230

WilsonPro 1050 Dual Booster System (Main Booster and In-Line Booster). If you do not need a dual main & inline amplifier boosting system, consider purchase of practically the same main Wall Mount Commercial Signal Booster but without inline amplifier, the Wilson Pro 1000.

Wilson Pro 1050 is the only passive distributed antenna system (DAS) with a unique dual­-amplifier design to compensate for cell signal that is lost over long lengths of cable ensuring that businesses have strong cell service throughout their entire building at all times.

All Bands, Multi-Carrier Dual Cellular Signal Booster System.

Wilson 1050 cell phone signal booster system provides significantly enhanced voice and data coverage including 4G LTE deep inside large homes or other buildings by compensating for signal loss caused by long cable runs. As cellular signal moves over long lengths of coaxial cables some of it is lost, reducing booster system performance. Wilson 1050 booster system addresses this technical problem by employing two separate boosters - a main signal booster and a supplementary inline booster.

Expected Indoor Coverage Area:

• Up to 75,000 sq. ft. with 5 bars outside signal.
• Up to 35,000 sq. ft. with 3-4 bar (-90 dB) outside signal.
• Up to 20,000 sq. ft. with 1-2 bar (-100 dB) outside signal.

What is included in this professional cellular signal booster kit?

1. WilsonPro 1050 Main Amplifier (Wilson 460030 / U460030 / U-460030) and Pro 1050 Inline Amplifier (Wilson 461030 / U461030 / U-461030).
2. Wide Band Directional Antenna (Wilson 31441) + 75 ft. Wilson 400 Cable).
3. Dome Antenna (Wilson 304412) + 100 feet Wilson 400 Cable.
4. Lighting Surge Protector (Wilson 859902).
5. 2 feet Wilson 400 Cable (Wilson 952302).
6. 100 feet Wilson 400 Cable (Wilson 952300).
7. Bonus Pair of two 2-Way Radios.
8. FREE Exterior Omni Antenna & Mounting Pole Kit.

How is Wilson PRO1050 different?

No other commercially available cell signal booster system uses the 1050's unique dual-amplifier design to compensate for signal that is lost over long lengths of cable. Wilson Electronics engineers designed the system so the "Wilson 1050" main and inline boosters communicate with each other. Working together the two amplifiers determine the actual signal bleed along the cable run, and supply sufficient boost to compensate for this lost signal.

In addition, the WilsonPro 1050 features XDR (Extra Dynamic Range) technology that prevents overload conditions which can, in accordance with FCC regulations, force a booster to reduce power or even shut down.

This powerful dual-booster design allows clients with large homes to enjoy maximum indoor cell coverage - no more dropped calls or lost connections, faster uploads/ downloads and a reliable, up to 32x stronger signal. When the WilsonPro 1050 senses that any incoming signal is too strong and threatens to overload the system, XDR automatically reduces signal gain to compensate for this overload condition while maintaining signal coverage throughout the building. In contrast, competing signal boosters shut down when they reach a maximum incoming signal strength threshold, causing the indoor cell signal to drop out.

Wilson Pro 1050's inline booster works only with the Wilson-Pro 1050 main, and cannot work as a stand alone booster. Nor can the inline booster work with any other cell signal booster. FCC regulations prohibit any sale or distribution of the inline booster except as part of the WilsonPro 1050 system. Like all WilsonPro cell signal boosters, the WilsonPro 1050 booster system is universal: it works for all cellular devices, all services including 4G LTE, and all U.S. and Canada cell phone carriers.

This 2G, 3G, 4G LTE professional signal booster kit is compatible with following U.S.A. and Canadian wireless service providers: