Wilson Pro 4000 Commercial Signal Booster 460223 by Wilson Electronics.

Wilson Pro 4000 incorporates four separate signal amplifiers feeding 16 or more indoor antennas. This 4 port wall mounted signal booster kit (4 amplifiers in one) provides maximum allowable uplink and downlink power. It has a full color display, indicating gain and power levels of each port and band, for easy antenna setup. It has built-in Extended Dynamic Range (XDR) technology which allows the booster to never shutdown due to too strong of an incoming signal. It comes with a locking AC cable which prevents accidental disconnection. It has the same power and similar features as WilsonPro 4000R except that this amplifier is mountable on any surface such as a wall or ceiling whereas Wilson Pro 4000R (not this purchase) is a rack mount booster kit with no ability to bolt it down on a wall or ceiling.

Wilson Pro 4000 fulfills the needs of businesses that don't require a rack-mounted booster. Otherwise similar to WilsonPro 4000R, this Wilson 4000 ("R" is missing because it is not rack mounted signal booster) delivers the power of four boosters in a single unit, providing cell coverage for up to 100,000 square feet of indoor space.

Expected Indoor Coverage Area:

• Up to 100,000 sq. ft. with 5 bars outside signal.
• Up to 50,000 sq. ft. with 3 to 4 bars (-90 dB) outside signal.
• Up to 25,000 sq. ft. with 1 to 2 bars (-100 dB) outside signal.

Expansion kits available for large scale installations such as in convention centers, metal-framed industrial buildings, underground parking lots, hospitals, schools, universities, etc. This eliminates previous industry limitations that reduced boosters to smaller-size venues. The extended dynamic range, or XDR technology, built within the Wilson 4000 makes it possible for the booster to adjust its signal gain as necessary, all while still providing stable connectivity. Wilson Pro 4000 cell phone signal booster (or weBoost 460223) is an enterprise grade, in-building cellular coverage solution that gives enterprises DAS-like coverage at a fraction of a DAS price.

What does this Wilson 4000 purchase include?

WilsonPro4000 complete commercial/ industrial/ enterprise grade cell phone signal booster kit comes with following.

1. 460023 / U460023 / U-460023 - 

Pro 4000 5 Band Rack Mount Signal Amplifier For Building.
2. 
314411 - Yagi Directional Donor Antenna (Exterior Antenna).
3. 304412 - 3G & 4G Interior Ceiling Mount Dome Antennae (Quantity 4).
4. 859902 - 50 Ohm Lightning Surge Protector.
5. 952302 - 2 feet Wilson 400 Ultra Low Loss Coax Cable w/ Nmale to Nmale Connectors.
6. 952375 - 75 feet Ultra Low-Loss Wilson 400 Cable with N-Male to N-Male Connectors.
7. 952300 - 100 feet Ultra Low-Loss Wilson 400 Cable w/ N Male to N Male Connectors (Quantity 4).
8. 
859900 - 120v AC Power Supply.
9. FREE Pole and Mounting Hardware to mount exterior antenna - 901117.
10. FREE Exterior Wide Band 3G & 4G Omni Antenna - 304422 (50 Ohm 4G Enterprise-Grade 5 dBi Model).

Instead of exterior uni-directional Yagi antenna included, you also have an option to use the exterior multi-directional "Omni antenna" (included at no extra cost). Omnis are less powerful than Yagis but they don't need to be pointed to a cell tower because they attract signals from all carriers and from all directions.

Optional Parts and Accessories (not included with this purchase):

• Indoor coverage expansion antenna kits available to cover more interior building spaces.

Optional upgrade to Plenum air coaxial cables.

We carry plenum rated cables that meet the toughest fire safety standards across USA. This Wilson-Pro signal booster system includes Wilson-400 coax cable to connect amplifier and interior antennas. If your residential apartment or commercial office building requires fire-rated cables in plenum areas, please contact us about upgrading to half inch plenum air coaxial cables. Plenum cables fully meet state and federal building fire safety codes. Furthermore, a Plenum cable has almost half the loss of signal for each foot of cable compared to 400 type coaxial cables. Therefore, Plenum cabling provides even more signal from Wilson-Pro amplifier to cell phones and other cellular devices such as tablet computers. However, Plenum air cables are more expensive and available at an additional cost. Please call us for more details if you would prefer Plenum cables instead, or you can also purchase Plenum cables and connectors separately.

Outstanding Features

  Expansion Kits Available For Large Scale Installations: No more one-size-fits-all scenarios! The rugged casing design of Wilson Pro4000 Plus allows for a neat and clean installation. Expansion kits make designing and ordering the kit a breeze.

Better Control with On-Board Software: To ensure greater connectivity throughout multi-storey buildings and other large spaces indoors, each interior antenna path is automatically and independently controlled with onboard software. Each port is independently controlled and has ability to maneuver its gain level (either up or down) as determined by the signal environment’s conditions. This is done without disrupting coverage from other antennas. WilsonPro 4000's software's thus an artificial intelligence marvel!

XDR (Extra Dynamic Range) Offers Continuous Connectivity: For a strong incoming signal from the tower, XDR provides Wilson-Pro 4000 with more tolerance than any competitive booster. The booster will never shut down with XDR due to a signal being too strong. This means that regardless of how strong the signal may be, the booster will never get overpowered and go into shutdown mode. This is a very unique feature that will save time and manpower for businesses that cannot afford interruption in service.

Easier Access with Color LCD: Wilson 4000 has a very clear and illustrative color LCD screen. The four-way navigation button beside the colored display enables users to go through all settings in order to ensure peak performance, with ease. Unlike other boosters, this Wilson 4000-Plus feature provides integrators effective and easy control of the product from start to finish. It also assists them in maintaining the booster system to make manual adjustments to uplink and downlink gain levels for each band.

Competitive Advantages

More Downlink Power: In environments where the incoming signal is weak, at least +12 dB more downlink power than any of its competitors ensures a stronger cell signal. The benefit achieved is a stronger signal sent to the inside antennas, thus covering a larger area from a single booster. This is the main feature of any cellular amplifier system and this Wilson Electronics' commercial grade booster system provides the best output making Wilson 4000, the flagship product of its Wilson Pro Series boosters.

Higher Uplink Power: A higher uplink power provides up to +3 dB more than any of its competitors, resulting in a stronger signal transmitted to the tower. An increased range from the cell site and greater user capacity is assured. In commercial and industrial environments, high aggregate cellular usage capacity is extremely important. It is crucial because businesses cannot afford cellular congestion resulting in less than optimal performance. This booster rises and meets the challenge by providing highest uplink power.

Overpowering Won’t Cause Shutdown: Wilson-Pro 4000 booster won’t shut down, regardless of how strong the incoming signal may be. Due to the amazing technology of XDR, the booster will continue to work in the strongest signal environments where others would shut down to meet original FCC regulations. However, the XDR technology enables it to stay powered but reduce the gain down to zero but rise again when overpowering signals subside. This saves precious time and maintenance headaches.

Sophisticated Software: Cellular signals are continuously fluctuating. However, the booster always operates at maximum gain because the software constantly monitors signal levels and makes adjustments accordingly. This level of sophistication in cellular signal amplifier provides consistent and stable reception indoors in extremely large spaces of up to 100,000 square feet with a single amplifier unit. With its "intelligent control" feature, signal gain is automatically adjusted with WilsonPro cellular booster, ensuring the building receives even signal coverage.

This 2G, 3G, 4G LTE professional signal booster kit is compatible with following U.S.A. wireless service providers: