Wilson Pro 70 Plus Select (50 Ohm) 462327R Omni/Dome (Refurbished)

Additional Coverage.

If you need more cellular coverage than you can get from one Wilson Pro 70 Plus Select amplifier kit, it is possible to use multiple systems within the same building. If you would like help designing such a system for your large building, please complete and submit our Custom Kit Request Form and we will gladly help you to design a custom solution to meet all of your signal reception challenges within your establishment.

Detailed list of contents of Commercial WCI Pro 70 Plus Cell Phone Signal Booster Kit.



462027 - Wilson Wide Band Amplifier For Building.

304422 - Wide Band 50 Ohm Outside Multi-Directional Omni Antenna (50 Ohm 4G Enterprise-Grade 5 dBi Model 304422).

304412 - Wideband 50 Ohm Inside Omni-directional Dome Antenna.

859902 - Lightning Surge Protector.

952302 - 2 feet Wilson 400 Coax Cable w/ Nmale to Nmale Connectors.

952360 - 60 feet Low-Loss Wilson 400 Cable w/ N Male to N Male Connectors.

952375 - 75 feet Low-Loss Wilson 400 Cable with N-Male to N-Male Connectors.

859900 - 120v AC Power Supply.

Optional Parts and Accessories (not included with this purchase):

Instead of exterior omni-directional Omni antenna included, an optional exterior uni-directional Yagi antenna can be purchased separately:

Exterior Wide Band Yagi Antenna - 314411. 

Yagis are more powerful than Omnis but they do have to be pointed to a cell tower because they attract signals from a carrier and in a single direction line of sight.

If more interior uni-directional wall mount Panel antennas are needed (50 Ohm), multiple expansion kits can be purchased separately:

One Panel Antenna Expansion Kit (50 Ohm) - 309906-50N.

Two Panel Antennas Expansion Kit (50 Ohm) - 309907-50N.

Three Panel Antenna Expansion Kit (50 Ohm) - 309908-50N.

If more interior omni-directional ceiling mount Dome antennas are needed (50 Ohm), multiple expansion kits can be purchased separately:

One Dome Antenna Expansion Kit (50 Ohm) - 304412-50N1.

Two Dome Antennas Expansion Kit (50 Ohm) - 304412-50N2.

Three Dome Antennas Expansion Kit (50 Ohm) - 304412-50N3.

Optional upgrade to Plenum air coaxial cables.

We carry plenum rated cables that meet the toughest fire safety standards across USA. This Wilson-Pro signal booster system includes Wilson-400 coax cable to connect amplifier and interior antennas. If your residential apartment or commercial office building requires fire-rated cables in plenum areas, please contact us about upgrading to half inch plenum air coaxial cables. Plenum cables fully meet state and federal building fire safety codes. Furthermore, a Plenum cable has almost half the loss of signal for each foot of cable compared to 400 type coaxial cables. Therefore, Plenum cabling provides even more signal from Wilson-Pro amplifier to cell phones and other cellular devices such as tablet computers. However, Plenum air cables are more expensive and available at an additional cost. Please call us for more details if you would prefer Plenum cables instead, or you can also purchase Plenum cables and connectors separately.

Designed to provide maximum coverage for luxury homes, large commercial retail or any other application needing better cell signal, the Pro 70 Plus Select signal booster significantly amplifies cellular signals for all carriers with up to 70 dB of gain, resulting in reliable 3G, 4G LTE cell coverage.

Supported Carriers.

Wilson 462327 Pro 70 Plus Select supports 2G voice, 3G data, 4G LTE, and 4G LTE Advanced networks from virtually all carriers in United States. For other locations outside USA, please review the frequencies listed below.

Confirmed carriers, networks and frequencies boosted by this kit.

• AT&T 2G, 3G, 4G HSPA+ & 4G LTE.
• Verizon 2G, 3G, 4G LTE & XLTE.
• Sprint 2G, 3G & 4G LTE.
• T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE.
• US Cellular 2G, 3G & 4G LTE.
• All other carriers using 700 MHz, 800 MHz, 1900 MHz, and AWS 1700/2100 MHz frequencies

"Wilson Pro 70 Plus Select" kit features a self-optimizing microprocessor and built-in graphical signal meter to minimize install time. Wilson Pro 70 Plus Select manual and installation guide is provided for review at the hyperlink below. The uplink and downlink power display makes it easy to determine the direction of the cell tower and the strength of available signal. The self-optimizing design eliminates the need for troubleshooting! Order Pro 70 Plus Select (50 Ohm) with weBoost Part # Wilson 462327, today!

Competitive Advantages for WilsonPro 70 Plus Select Product Line.

• Lower Overpowering and Shutdown Threshold:  This enables the booster to work with a stronger incoming signal, up to +10dB stronger, before overpowering and shutting down. This is a huge benefit in strong signal environments like cities and locations close to a carrier tower.

• Intelligent Shutdown Management: Cellular boosters are required by the FCC to shut down if an incoming signal is too strong on a particular band. With the WilsonPro 70 Plus, when the signal decreases back to the acceptable level, the band will turn back on. With the competition, once the band shuts down, the only way to turn it back on is to power cycle the booster. This can cause the installer to accrue additional costs to go back on site to power cycle the booster.

• Sophisticated Software: Software is always monitoring the incoming signal and adjusting the booster accordingly. Cellular frequencies are constantly fluctuating. The software is always monitoring this and making immediate adjustments, enabling the booster to operate at maximum gain consistently.

• Highest Downlink Power: This allows for more signal in environments where the incoming signal is strong, up to +12dB more downlink power than the competition. The benefit is a stronger signal coming out of the booster, providing more coverage from a single booster.

• Highest Uplink Power: This allows for a stronger signal radiating to the tower, up to +3dB more than the competition, providing greater user capacity and increased range from the cell site.

Specifications.

Three Year Warranty for WilsonPro: The Best-In-Class Warranty for Signal Boosters.

• All WilsonPro products are protected under WilsonPro’s 60-day money-back guarantee. If the performance of any product is not acceptable, simply return the product complete with dated proof of purchase. 

• WilsonPro Signal Boosters come with a 3-year warranty on materials and defects in workmanship. Warranty cases are easily resolved by returning the product direct to us, complete with dated proof of purchase. 

• You can also return signal boosters directly to the manufacturer at the consumer's expense, complete with dated proof of purchase and an RMA (Returned Material Authorisation) number - which will be supplied by WilsonPro.

• At its discretion, WilsonPro shall either replace or repair the product. WilsonPro will cover delivery costs for the replaced or repaired product back to the original consumer if located within the continental US.

This warranty will not apply to any signal booster determined by WilsonPro to have been subjected to abuse, neglect, misuse, or mishandling that damages or alters the electronic or physical properties. Your warranty will be voided if you fail to use a surge protected AC Power strip with a minimum of 1000 Joule rating.

This Wilson Electronics' WilsonPro signal booster kit is compatible with almost all United States service carriers including the following.