weBoost Flat 10 Inches Window Entry Cable 951177. For those working on DIY home improvement projects, the new 10" flat cable weBoost 951177 with its simple design, will make installing Wilson Electronics Home products more intuitive. It will provide easier access to an outside antenna for a smoother installation. This new flat coaxial cable enables a more seamless installation, providing easier access from amplifiers typically installed indoors to an outside external antenna to be mounted on outside wall or the roof. No more drilling a hole to push out a thick cable! Use this neat little flat coax cable for exterior cellular antennas for cleaner installs of your cell phone signal booster.

This 75 Ohm flat cable allows the cable connection to pass the signal through a window frame. The connector ends have F-Female connectors on both ends. Therefore, you will need a second RG-6 cable with this cable. One cable can be placed between the signal amplifier and this Window Entry Cable with the second cable would go between this Window Entry Cable and the Exterior Antenna. The reason for the big difference in high cost expense of this 10 inches flat coaxial cable part number 951177 (low dB loss) versus the cheaper low cost 8 inches flat coax cable part number 951152 (higher dB loss) is that this flat cable is a much higher quality composite providing much less signal loss despite its longer length.